(1) well you’ve read my story above. I’m finally decided to go onto the internet but every time i try the 360 tells me that it can’t read my internet connection. My question is to all who are listening. Is it possible that my 360 connection card is screwed up from the chip that was first installed?

(2) i know that you all only deal with xbox 360. But since you gave me such great help the last time, I was wondering if you could steer me in the right direction on soft modding my wii. I would like to thank you for your hardwork and time in advance.

Head over to http://www.ixtreme.net for help

will jungleflasher do this on Intel P965/G965 chipset with just a sata cable on vista?

appreciate an answer

http://rapidshare.com/files/234012260/LiteOn_iXtreme-THX_v1.6.REPACK.rar

JungleFlasher 0.1.60
========================================

Release for iX 1.6 for Samsung, Benq and Lite-On… Jf will now target 1.6 files by default

Hitachi Support Updated
—————————————
Right Click windows drive list for context to open/close drive tray

DVDKey32 Support Updated
—————————————
Added Support for USB Extractor Switch in Vista, for remote launch of DVDkey32 from probe

http://jungleflasher.net/logs.html

Team HyperX Presents IXtreme 1.6 firmware for Benq, Samsung and Liteon drives
——————————————————————————
IXtreme fw for Benq, Samsung and Liteon drives!

Features
——–
-Strict Wave 3 compliance! hybrid (modified disks) will not boot!
-Strict drive speed compliance – 12x only for game discs!
-Support for SS V2!
-Integrated 0800 for game dumping including SS v2!
-Full support for all known game exceptions! eg ddr etc!
-One shot boot mode! – allows a one off boot of gamedisc without -stealth/partition checks (will still use stealth), use activate.iso disk to activate each time!
-Support for easy drive key/version info cmd, same as liteon!
-Strict stealth/wave checking, one shot boot mode will boot wave(x)!

More Info
———

Strict Wave 3 compliance means wave 3 games will only boot if they have correct PFI/DMI/SS and timestamp for wave 3
Strict drive speed compliance means games will only boot if drive is set for the initial speed of 12x, any modification of this make games fail to boot
SS v2 suports multiple timing samples for challenges type 5 and 7 , stroing them in the SS. This is a pre-requiste for SS v3 which has support for the so called AP2.5 check. Since this has never been used or may never be used by MS we will adopt a wait and see approach and continue to monitor for its usage.
With drive in Windows mode (Tray half open on powerup) 0800 mode is activated allowing easy dumping of game disc including SS v2. In this mode the drive is also able to output drive key, fw version and drive type by using a simple custom inquiry command.
Game exceptions are integrated in the fw for games that do not comply with the strict wave checks but are legitimate. These are Dance Dance Revolution Universe, Stoked, Ping 17 disk, afro samurai
One shot boot mode allows you to boot a Wave X or non stealth game by using the activate.iso disk as a flag. Just insert the activate disc and the next disc inserted will boot without any strict checks. This will still utilise full stealth if available. As soon as that disc is booted the flag is cleared, and you will have to re-insert the activate disk again to enable one shot boot. As always use with caution.

http://rapidshare.com/files/233361349/iX_v1.6_pack.rar

iXtreme 1.6 to be released on 3 Year anniversary for ixtreme 1.0
>> Just a little update to announce the official release date of the new ixtreme firmware!

the official release date is set for May 14th, 2009.

iXtreme has taken quite literally thousands, if not in the tens of thousands of hours to produce, maintain and support, not to mention over 50 thousand dollars worth of professional equipment to break the technologies behind the LiteOn security. So for those of you out there who think this is all free, think not! Just free to you We appreciate all the forms of support out there, to the people who create software to aid the modification process, and each and every person out there who has spent his or her personal free time to help another user on the forums, IRC, or real life, to modify their console.

A new beta version of JungleFlasher(info) has been released:
[QUOTE]
JungleFlasher 0.1.59 – cleanup to 0.1.55
DVDKey32(info) Support Updated
Added Support for USB Extractor Switch, for remote launch of DVDkey32 from probe
Added optional delay on dvdkey32… allow time for probe…. delay32 in reg, default is 0, max 20 sec
Hitachi Support Updated
Added Stop-Disk to Hitachi commands, People were still putting in a disk, a habit from FWTB days, commands would fail and the drive would crash.
Improvements to Ram upload dump, should dump in 1 – 1.5 sec… added timer for the fun of it…
Introducing USmodeB with JungleUSB drivers, for Hitachi
1. JungleUSB drivers allow Hitachi on USB to be seen in Mode-A, mode-B command can be issued
2. at power up, you may need to open/close the drive to allow windows to PnP fully
3. Send USmodeB – JF will enumerate all windows drive letters and find any Hitachi, JF will send mode-b
General items Updated
* Added, test for port IO….
JF will scan device tree for PortIO, 4 outcomes are possible
i. port io running aok
ii. port removed
iii. port not installed
iv. port io has an error
* Fixed, Ctrl f7 for Drive pororties on PortIO, drives were not being detected
* Added donate icon, users complained they conuldn’t see….

Link: copy & paste

http://jungleflasher.net/files/JungleFlasher.0.1.59.Beta.rar

1.
[19:54] ix1.6 for benq is complete and in testing,samsung/liteon soon to follow, then there’s hitachi last!
2.
[20:05] ix1.6 – Strict Wave 3 compliance! hybrid(modified disks) will not boot!
3.
[20:06] ix1.6 – Strict drive speed compliance – 12x only for game discs!
4.
[20:07] ix1.6 – Support for SS V2!
5.
[20:07] ix1.6 – Integrated 0800 for game dumping including SS v2!
6.
[20:09] ix1.6 – Full support for all known game exceptions! eg ddr etc!
7.
[20:12] ix1.6 – One shot boot mode! – allows a one off boot of gamedisc without stealth/partition checks (will still use stealth), use activate.iso disk to activate each time!
8.
[20:15] ix1.6 – Support for easy drive key/version info cmd, same as liteon!
9.
[20:18] ix1.6 has strict stealth/wave checking, one shot boot mode will boot wave(x)!

-> The new iXtreme 1.6 won’t load modified Disks with hybrid StealthSectors (e.g. Games with 1.51 modified to work on 1.5). This is because of your own security.

-> There’s an option with what you can turn of/on the StealthCheck on iXtreme, which means you can now load NON-Stealth Games. Though you have to activate this option everytime you want to play a NON-Stealth 360 Game. Activate it with the “activate.iso” coming with iXtreme. But iXtreme is of course still Stealth.

-> You can now dump your original 360 Games through your 360 Drive with 0800 Dumping. No need for the Kreon Drive anymore!

-> The new iXtreme 1.6 will now support StealthSectors V2, which is probably safer for you. More information about this new feature will follow soon. (!)

-> Drive Speed for games is set to 12x due to less ban-risk.

-> The new iXtreme 1.6 is finished for BenQ’s and right now in testings. For Samsung’s and LiteOn’s it is almost finished and Hitachi is going to be the next.

Stay tuned for further information about the New iXtreme Experience (NiXE) !

James

I’ve downlaoded jungleFlasher 0.26 Beta, portIO32, ixtreme 1.5 firmware & made myself a key grabber tool.

I’ve also read the tutorial from team-xecuter (http://team-xecuter.com/ck3/liteon_windows.htm) as well as N00B’s guide (http://dwl.xbox-scene.com/iriez/N00B_LiteOn_Flash_with_VIA.pdf). However, I don’t think I fully understand what’s the purpose behind each step.

Do both of the tutorials mention that I still can restore my lite-on drive to original after I flashed it? If no, does anybody out there know how to do it?

http://www.adploits.com/2009/03/10/360-modification-disc-v151-for-ixtreme-firmware-download-it-here/